Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Framingham
Dryer vent cleaning in Framingham typically runs $149-$289 for a single-family home, and most jobs are completed in under two hours. The price depends on vent length, accessibility, and whether the vent shares a chase with an older chimney flue. If you own a post-WWII Cape Cod or colonial in Nobscot or off Route 9, your dryer vent likely runs through or alongside a clay-tile flue sized for an oil boiler that was never relined after the gas conversion. That changes what a proper cleaning involves. Call (857) 567-8887 for a written quote before anyone steps foot in your house.
Why Emberly Chimney Cleaners Boston Is Framingham’s Preferred Dryer Vent Cleaning Company
We’ve worked on enough Framingham homes to know what’s behind the wall before we open it. The housing stock here tells a specific story: late-19th-century mill-worker tenements in Saxonville, triple-deckers downtown, and thousands of Cape Cods and ranches built between 1945 and 1970. Each era routed vents differently, and each era’s mistakes show up differently. Our techs know that a dryer vent in a Nobscot Cape Cod likely shares a flue chase with an oil-to-gas converted chimney, and that a Saxonville vent might thread through a coal-era stack with hidden transition points. That local knowledge means we look for things a generic vent cleaning crew would never check.
Every visit includes a camera inspection and a documented photo record. That’s been our standard since 2009, long before most companies in the MetroWest area offered it. Clause 4 of the Haven Standard requires it on every job, no exceptions. You’ll see exactly what we see: lint buildup, disconnected ducts, corroded pipe, or a clean vent that needs nothing more than a routine cleaning. If we recommend additional work, you’ll have photos in hand to verify it. Written price, written scope, written warranty: delivered before work starts, not after the tech is already in your laundry room.
Our Dryer Vent Cleaning team serves Framingham with background-checked, uniformed technicians. Dispatch is coordinated from our Boston office, but crews work locally throughout Framingham, so scheduling is straightforward and we’re typically in the area multiple days each week. You’ll get a named tech and a text when they’re on the way. And when you call, a live person answers, 24/7.
Our Dryer Vent Cleaning Services in Framingham
Dryer Vent Cleaning
A standard dryer vent cleaning in Framingham runs $149-$289. We remove lint from the full vent run, from the dryer connection to the exterior termination. In post-war Capes and colonials, we pay particular attention to vents that run through masonry chases. Lint doesn’t just block airflow; in a shared chase with an eroded flue, it can become a fuel source if a chimney fire ever reaches it. We clean the vent and document the condition with before-and-after photos.
Level 1 Inspection
Level 1 is the visual inspection we perform on every visit, whether you’re having a vent cleaned or a chimney swept. We check accessible portions of the vent, the termination, and any visible pipe in the basement or crawlspace. In Framingham’s older homes, this often means tracing a vent path through unfinished basements in Saxonville or cramped utility closets in downtown triple-deckers. If we see rust staining, loose connections, or kinked flex pipe, we photograph it and note it in your written record.
Level 2 Camera Inspection
A Level 2 camera inspection is required when an appliance or venting system has changed, or when we suspect hidden damage. In Framingham, this applies to most homes built before 1970. We run a camera down the vent and any adjacent flue, looking for disconnected sections, collapsed pipe, or lint escaping into wall cavities. If your dryer vent runs through or alongside an old oil-to-gas converted chimney, the camera lets us separate vent failure from flue failure. That distinction matters. One costs a few hundred dollars to fix; the other can require a liner.
Dryer Vent Repair & Reconnection
When we find a disconnected duct, we reconnect it. When we find rusted or crushed sections, we replace them. Common repairs in Framingham include reinstalling vent pipe that pulled apart at joints, replacing corroded galvanized sections in unlined chases, and adding proper connectors where flex tube meets rigid pipe. We stock Famco connectors on our trucks because we use them constantly in older Framingham homes. The repair is quoted in writing before we touch it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Framingham
We work with the liner and venting systems already installed in Framingham homes. If your dryer vent passes through a chimney with a HeatShield or Gelco liner, we inspect the connection point and confirm the vent isn’t compromised where it passes through the masonry. If a liner was installed years ago and the dryer vent taps into a flue adjacent to it, we check for gaps, corrosion, and lint migration. Our techs are trained on these systems and can tell you whether the vent, the liner, or both need attention. Materials are sourced through Haven’s buying network to keep pricing honest, not marked up because a supplier is convenient.
Common Dryer Vent Cleaning Problems We See in Framingham Homes
- Lint escaping into wall cavities. In older Framingham homes, dryer vents were often assembled with short sections of flex pipe and tape at the joints. Decades of heat and vibration loosen these connections. By the time we’re called, lint has been silently filling the chase for years. A disconnected vent isn’t just inefficient; the lint becomes an ignition source inside the wall.
- Vents routed into unlined or oversized flues. Post-war Capes in Nobscot and along Route 9 frequently have dryer vents terminated into old oil-furnace flues. The flue is far too large for a dryer’s exhaust velocity, so warm, moist air lingers. The moisture condenses on the clay tile, soaks the masonry, and corrodes the vent pipe from the outside in.
- Frosted or clogged terminations during freeze-thaw cycles. Framingham’s 50-70 freeze-thaw events per heating season open mortar joints and push moisture into any vent passing through a chimney crown. If the termination hood is old or missing, moisture wicks inward, rusting the pipe and trapping lint against the corroded surface. We see this most often in Saxonville mill-era homes with vents exiting through masonry sidewalls.
- Backdrafting from shared flues. In some converted triple-deckers and older colonials, a dryer vent and a gas appliance share a common chase. If the appliance flue is oversized and the dryer vent is undersized, the dryer’s exhaust can backdraft into the living space under certain wind conditions. Camera inspection shows us the exact transition points where this occurs.
Pricing for Dryer Vent Cleaning in Framingham, MA
Here’s what you can expect to pay in Framingham:
Dryer vent cleaning (single-family home, standard vent run): $149-$229. This is the price range for most Capes, ranches, and colonials with a vent run under 25 feet and an accessible termination.
Dryer vent cleaning with camera inspection (Level 2): $229-$329. This applies to older homes or any vent that shares a chase with a chimney flue. In Framingham, that’s most houses built before 1980.
Vent disconnection repair or joint replacement: $95-$185 per section, depending on access. We quote this in writing before starting.
Termination hood replacement: $80-$145, including materials and sealing.
Factors that move the price: vent length over 25 feet, roof access, crawlspace work, or removal of an old louvered cap. We don’t charge extra for photos or the written record. Every job is quoted before work begins, and if you bring us a written competitor’s estimate, we’ll give you a free second opinion.
We Also Serve Cities Near Framingham
Our crews cover Framingham and surrounding MetroWest communities. We service dryer vents and chimneys in Waltham, Newton, Norwood, and Cambridge, with the same written pricing and camera-backed documentation on every job. If you’re just over the Framingham line, we’re likely already working in your neighborhood.
Serving Framingham, MA - Our Local Coverage Area
We’re based in the Framingham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Framingham
Yes. When a dryer vent runs through a chimney that previously served an oil boiler, our cleaning includes a visual and camera check of the adjacent flue at the points where the vent passes through. In most Framingham Capes converted in the 1980s and 1990s, the original clay-tile flue was never relined for gas. The oversized flue traps acidic condensate, which erodes mortar and tile over time. We photograph what we find and show you the images before recommending any liner work. If the liner is intact and the vent is clean, we’ll say exactly that. Call (857) 567-8887 to schedule.
Once a year for most Framingham homes. The heating season here runs October through April, which means dryers are running constantly for seven months, often against cold exterior walls that increase condensation inside the vent. Lint accumulates faster when the vent is cold and moist. Homes with longer vent runs, multi-story laundries, or vents through unheated chases should be cleaned twice a year. If you can’t remember the last time the vent was cleaned, call us at (857) 567-8887 and we’ll do a camera-backed cleaning and document the condition.
You’ll get a full photo record from the camera run, timestamped and written into your job documentation. This is required under Clause 4 of the Haven Standard and has been our practice since 2009. If we see cracked tile at the transition points where a coal flue was narrowed for oil and then gas, we’ll show you the exact frames. If we recommend relining, we’ll hand you the photos and a written scope with a written price. You’ll never be asked to approve a liner based on a verbal description. That’s the entire point of the camera.
Yes. If your chimney already has a DuraFlex, HeatShield, Gelco, or Olympia Chimney liner installed, we’ll inspect the area where the dryer vent interacts with that liner and confirm the connection is sound. We won’t recommend replacing a liner that’s functioning. If the vent itself is deteriorated where it passes through the masonry, we’ll quote the vent repair separately and leave your liner alone. Call (857) 567-8887 for a written quote.
Yes. Framingham’s 50-70 freeze-thaw events per heating season continuously open mortar joints on exposed crowns. If your dryer vent passes through that crown without a proper thimble or flashing, moisture enters the chase, rusts the pipe from the outside, and eventually creates a lint trap inside the corroded section. A clean vent with a failed crown is still a fire risk. We’ll surface this in the photo record and quote the crown repair separately, in writing, with no pressure.
What We Found in a Saxonville Triple-Decker
We cleaned a dryer vent in a Saxonville triple-decker where the vent ran through a chimney originally built for a coal-fired furnace, then adapted for oil, then gas. The homeowner called us for a routine cleaning. Our tech found third-degree creosote in the old flue and spalling brick, but the critical finding was elsewhere: the dryer vent itself had disconnected inside the chase, and lint had been dumping into the wall cavity behind the laundry room. We reinstalled the duct with a proper Famco connector, then recommended a Level 2 camera inspection of the adjacent flue. The camera showed cracked tile segments at every fuel transition point, exactly where we expected. This is what we mean by separating vent failure from flue failure. The homeowner walked away with photos of both, a written quote for the liner work, and no pressure to decide that day.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Boston, serving Framingham and MetroWest.
If your dryer vent needs cleaning or you want camera-backed documentation of what’s actually happening inside your Framingham chimney chase, call (857) 567-8887. We answer live, quote in writing, and show you the photos before we recommend anything.
Dryer Vent Cleaning in Nearby Areas